OX-2201-EAE-2580-20M00 preliminary version: subject to technical modificat ion. ocxo www.vectron.com modified 2011-05-25 by g?hrig, detlef index : p2 printed 2011-05-26 ? page 1 of 5 vectron international ? product specifications ox-2201-eae-2580 nominal frequency (f0) 20 mhz frequency stabilities parameter frequency stability operating temp. range vs. operating temp. range (df/f@25 c) -25 to 25 ppb -40 ... 85 c parameter value condition initial tolerance (df/f0) -200 to 200 ppb @25 c vs. supply voltage change (df/f) -5 to 5 ppb static; 3.3 v 5 % vs. load change (df/f) -5 to 5 ppb static; load 5 % vs. aging / daily (df/f) < 1 ppb after 30 days ; @ 25 c vs. aging / month (df/f) < 30 ppb after 30 days ; @ 25 c vs. aging / year (df/f) < 100 ppb after 30 days ; @ 25 c vs. aging / 10 years (df/f) < 1 ppm after 30 days ; @ 25 c drift 24h over -40..85c: <50 ppb peak-peak rf output parameter value condition signal lvcmos load 15 pf 10 % rise time < 10 ns @ 10 to 90 %vout fall time < 10 ns @ 90 to 10 %vout duty cycle 40 / 60 % @ 1.65 v v low x < 0.4 v v high x > 2.4 v harmonics <- 30 dbc supply voltage parameter value condition supply voltage (vs) 3.3 v 5 % current consumption steady state < 400 ma @ vsnom & 25 c current consumption during warm up < 900 ma @ vs additional parameters parameter typ. max. condition phase noise -85 -75 dbc/hz@1hz -110 -100 dbc/hz@10hz -130 -125 dbc/hz@100hz -143 -135 dbc/hz@1khz -150 -145 dbc/hz@10khz parameter value condition warm-up time < 3 min @ 25 c to final frequency processing & packing handling &processing note additional environmental conditions rapid temperature changes mil-883-1010 cond b 1000 cycles -55/125c vibration mil-std-883 meth 2007 cond a 20g 20-2000hz 4x in ea ch 3axis 4 min shock mil-std-202 meth 213 cond.c 100g 6ms 6 shocks in ea ch direction solderability j_std_002b cond a leaded/ cond. b smd 245c (diving ti me 5 0,5sec.) diplook with 8h damp pre-treatment: solder wetting >95% solvent resistance mil-std-883 meth 2015 solv. 1,3,4 esd hbm jesd22-a114-a class 2 10* 2000v moisture sensit. level 1 jesd22-a113-b rohs compliance 100% rohs compliant
OX-2201-EAE-2580-20M00 preliminary version: subject to technical modificat ion. ocxo www.vectron.com modified 2011-05-25 by g?hrig, detlef index : p2 printed 2011-05-26 ? page 2 of 5 vectron international ? product specifications ox-2201-eae-2580 additional environmental conditions washable non-washable device absolute maximum ratings parameter min typ max units condition supply voltage (vs) 6 v operable temperature range -40 85 c storage temperature range -40 85 c
OX-2201-EAE-2580-20M00 preliminary version: subject to technical modificat ion. ocxo www.vectron.com modified 2011-05-25 by g?hrig, detlef index : p2 printed 2011-05-26 ? page 3 of 5 vectron international ? product specifications ox-2201-eae-2580 enclosure type g185c height 12.1 mm all units in mm pin connections pin 1: i.c. (=> do not connect) pin 2: n.c. pin 3: vs (supply voltage) pin 4: rf-output pin 5-6: n.c. pin 7: gnd (case) marking ox-2201-eae-2580 20,000 mhz * vi ayyww * pin-1 marking
OX-2201-EAE-2580-20M00 preliminary version: subject to technical modificat ion. ocxo www.vectron.com modified 2011-05-25 by g?hrig, detlef index : p2 printed 2011-05-26 ? page 4 of 5 vectron international ? product specifications ox-2201-eae-2580 reflow profile profile feature pb-free assembly/sn-pb assembly average ramp-up rate (tl to tp) 3c/second max. preheat -temperature min (tsmin) 150c -temperature min (tsmax) 200c -time (min to max) (ts) 60-180 seconds tsmax to tl - ramp-up rate 3c/second max. time maintainted above - temperature (tl) 217c - time (tl) 60-150 seconds peak temperature (tp) max 260c time within 5c of actual peak temperature (tp) 20-40 seconds ramp-down rate 6c/second max. time 25c to peak temperature 8 minutes max. note: all temperatures refer to topside of the pack age, measured on the package body surface. additional information this smd oscillator has been designed for pick and place reflow soldering. smd oscillators must be on the top side of the pcb du ring the reflow process.
OX-2201-EAE-2580-20M00 preliminary version: subject to technical modificat ion. ocxo www.vectron.com modified 2011-05-25 by g?hrig, detlef index : p2 printed 2011-05-26 ? page 5 of 5 vectron international ? product specifications ox-2201-eae-2580 standard shipping method tape width w [mm] quantity per meter quantity per reel p [mm] a [mm] b [mm] k [mm] 44 35.7 175 28 22.5 25.9 12.8 notes: unless otherwise stated all values are valid after warm-up time and refer to typical conditions for su pply voltage, frequency control voltage, load, temperature (25c) . preliminary version: subject to technical modificatio n.
|
